High and Low Temperature Test Chambers
Home
/Environmental Test Chambers
/High and Low Temperature Test Chambers
/
High quality 1.5L scale lab spray dryer equipment
Lab scale spray dryer is suitable for the production of in universities, research institutes and food and pharmaceutical chemical enterprises.
Mini desktop injection machine is the most cost-effective way to produce the small plastic components in the market. As a redesigned and optimized mod
Delivery fully stainless steel spray dryer to Thailand successfully The spray dryer is one of our best selling product. We have exported many machines
Delivery dry ice blasting machine to AUE Dry ice blasting is a revolutionary blasting method that uses dry ice pellets as the blasting material.
Laboratory spray dryer delivery America successfully Ollital Technology specialize in 2L 5L 10L/hour laboratory spray dryer, we just shipped one full
Model Number:
OLT-HL-100LCompliance:
CE CertifiedMinimum Order Quantity:
1Capacity:
100LVoltage:
108V-380V 50/60HZWarranty:
3 yearTemperature range:
-40°C to 150°CDimension(L*W*H):
40*50*50 cmPackaging Details:
Standard export wooden boxDelivery Time:
8-10 dayHigh And Low Temperature Test Chamber can test the material property in high and low temperature, such as electrical, electronic products, as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements, it simulate the environment to test proformance of material as well as other relevant characteristics of physical at low temperature or high temperature, Through testing to determine product performance whether it is still be able to meet the intended requirements.
OLT-HL-80L
Model
OLT-HL-100L
OLT-HL-150L
Inner size D×W×H
40*50*40 cm
40*50*50 cm
50*60*50 cm
Index
Temperature
-40°C to 150°C
Fluctuate/
uniformly
≤±0.5°C /.+2°C to 3°C
Heating-up time
-40°C to 100°C about 55min
Cooling time
25°C to -70°C about 80min
Control
system
Controller
LED digital P,I,D, + S,S,R.microcomputer controller
Accuracy
Setting accuracy temperature ±0.1°C,directed accuracy temperature ±0.1°C,resolution ±0.1°C
Sensor
Platinum resistance PT100Ω/MV
Heating system
Independent system, nickel-chromium alloy electric heating type heater
Cooling system
Totally enclosed air-cooled single-stage compression refrigerate mode / original from
Frence "Tecumseh" / totally enclosed air-cooled re-compression refrigerate mode
Circulatory system
Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel
Material
Outer material
High-quality carbon steel plate. Phosphide electrostatic spray treatment /
SUS304 stainless steel hairline treatment
Inside material
SUS304 High-quality stainless steel light board
Insulation material
Rigid polyurethane foam, ultra-fine glass fiber cotton
Insulation
Double-resistant high-temperature aging of silicone rubber seal
Standard collocation
a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs,
test leads holes (25,50 mm) 1 pcs
Protector
Leak current, short circuit, over temperature, motor overheating, over-pressure
compressor, overload, over-current protection
Timer
0.1 to 999.9 (S,M,H) adjustable
Voltage
AC380V±10%, 50±0.5Hz, Three-phase five-wire system
Working environment
5°C to 30°C ≤85%R.H
Corresponding standard:
1. GB 10589-89 low temperature testing condition
2. GB 10592-89 high temperature testing condition
3. GB 11158-89 high temperature testing condition
4. GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and electronic products,
5. GB2423.1-89 The basic test regulation for electrical and electronic products, Test A: low-temperature test method
6. GB2423.2-89 The basic test regulation for electrical and electronic products, Test B: high-temperature test method
7. The basic test regulation for electrical and electronic products, Test: high-low-temperature test method
Applicable industries:
High And Low Temperature Test Chamberapplied to test the products quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care and so on.
Ollital Technology would like to establish win-win business cooperation with distributors all over the world.
online service
+86 15960821529
kevin@ollital.comkevinollital@gmail.com
+86 15960821529
+8615960821529
